Saketh Exim  

​​Plot No.D- 146/147, Turbhe MIDC, TTC Industrial Estate,
​Opp. Balmer Lawrie Vaan Leer, Turbhe, Navi Mumbai -400705.
NAVI MUMBAI,  MAHARASHTRA  400705

India
http://www.sakethexim.com
  • Booth: 8941

SAKETH EXIM LIMITED is a PUBILC LISTED COMPANY on NSE EMERGE Stock Exchange of India.

Saketh is an Industrial Powerhouse, with a dominant presence in Manufacturing and Fabrication of Metal Products, used in Pipe Support Systems, HVAC, Anti Vibration System and Equipments for Industrial, Commercial, Utility and OEM Installation.

Our Product range includes Pipe Hangers, HVAC, Anti Vibration System, Slotted Channels, Fasteners, Rubber Support Inserts, Threaded Rod, Anchors, Structural Angles.

Saketh Exim products are certified and approved by Underwriter's Laboratory (USA) and FM Approval (USA) for Fire Sprinklers System Installations.


 Products

  • UL+FM CLEVIS HANGER
    A CLEVIS HANGER consists of a yoke and
    a support strap made from shaped MS strip and a joining bolt. 15° swing in
    either direction allows pipe to easily feed
    through. Pipe will not pinch when installing.
    Bolt holes for
    quicker overhead installation....

  • A CLEVIS HANGER provides for sizeable
    loads to be supported and for an elevation
    adjustment depending upon the pipe diameter.
    The lower nut adjusts the piping to the proper
    elevation and the upper nut, when locked into
    position, prevents loosening due to vibration.

    APPROVALS:
    Underwriter's Laboratory (UL)
    Factory Mutual's (FM)
    Manufacturers Standardization Society ANSI/MSS SP-58 & SP-69 (Type 1)
    Federal Specification WW-H-171E & A-A-1192A (Type 1)

  • UL+FM SPRINKLER HANGER
    A SPRINKLER HANGER consists of a
    piece of mild steel shaped to support
    pipe. Gives Double thickness at the
    support. Most suitable for fire
    extinguishing pipes installation....

  • A SPRINKLER HANGER recommended to
    provide vertical support to non insulated
    piping systems. By adjusting the position
    of the sprinkler nut on the hanger rod at
    the top of the hanger, pipe elevation can
    be altered.

    APPROVALS:
    Underwriter's Laboratories (UL)
    Factory Mutual Approved (FM)
    Manufacturers Standardization Society ANSI/MSS SP-58 & SP-69 (Type10)
    Federal Specification WW-H-171E & A-A-1192A (Type 10)

  • UL+FM PIPE HANGER
    It consists of piece of mild steel shaped to wrap
    around the pipe. The selection of the
    proper HANGER
    depends upon load to be carried. Permits
    installation before and after pipe is in place.
    Lining Reduces noise upto 18 dB....

  • PIPE HANGER WITH EPDM LINING/PIPE HANGER WITHOUT LINING is
    recommended for non-insulated
    stationary pipelines in a horizontal
    position. It can be used for supporting
    pipes along with the roof.

    APPROVALS:
    Underwriter's Laboratories Listed (UL)
    Factory Mutual (FM)
    Manufacturers Standardization Society ANSI/MSS SP-58 & SP-69(Type 12)
    Federal Specification WW-H-171E & A-A-1192A (Type25)

  • UL+FM U STRAP
    it is recommended for
    supporting a piping system with fittings
    vertically or horizontally to walls or ceilings.
    It can be used as a restrainer ....

  • CONSTRUCTION:
    A Standard Pipe Strap consists of a piece of
    mild steel shaped to hold the pipe down to
    walls or ceilings.

    APPROVALS:
    Underwriter's Laboratories Listed (UL)
    Factory Mutual Engineering Approved (FM)
    Manufacturers Standardization Society ANSI/MSS SP-58 & SP-69 (Type 26)
    Federal Specification WW-H-171E (Type 26) & A-A-1192A (Type 26)

  • FM RISER CLAMP
    RISER CLAMPS are recommended for the support and
    /or restraint of vertical steel pipes. A RISER CLAMP is
    designed to attach to the pipe and to rest on a structural
    member or floor; It is not designed to have hanger
    rods attached to it to support the pipe....

  • RISER CLAMPS consists of two mild steel flat bars bent
    to shape and held together by two bolts. Designed to
    act as a rigid support or guide vertical pipes. The clamp
    should be bolted to the pipe just below support lugs or
    other attachments that can carry a shear load.

    APPROVALS:
    Manufacturers Standardization Society ANSI/MSS SP-58 & SP-69(Type 8)
    Federal Specification WW-H-171E & A-A-1192A (Type 8)

  • UL U BOLT
    U-Bolt is provided with four standard hex nuts
    and has a longer straight threaded length....

  • U-Bolts are used to secure piping to structural
    members. When the piping is below the
    structural member, the U-Bolt provides vertical
    support and restricts lateral movement while
    allowing for axial movement. When the piping
    system is above the structural member, the
    U-Bolt restricts lateral movement and upward
    movement while allowing axial movement of
    the piping.

    APPROVALS:
    Manufacturers Standardization Society ANSI/MSS SP-58 & SP-69(Type 24)
    Federal Specification WW-H-171E & A-A-1192A (Type 24)


Send Email

Type your information and click "Send Email" to send an email to this exhibitor. To return to the previous screen without saving, click "Reset".