Joliet Equipment Corporation

One Doris Ave.
Joliet,  IL  60433

United States
http://www.joliet-equipment.com
  • Booth: 3005

Supply of AC & DC Drilling Motors powering drawworks, mud pumps, top drives and related land and offshore equipment. “HTM ” AC motor line: 400HP, 600HP, 800HP, 1200HP, 1500HP, 1800HP & 2500 horsepower selections. Products meet ISO9001-2000 Quality Standards and ATEX/CE certification by Sira. 100,000Sq.Ft. Repair facility for rotating equipment.


 Products

  • HTM2000D-J3A AC Drilling Motor
    The Joliet Horizontal AC Drilling Motor delivers a continuous 2000HP rating for mud pump and rotary table applications and boasts an impressive intermittent rating of 3045HP for drawworks duty....

    • (VPI) Form Wound 6-Pole Stator.
    • Class H Insulation.
    • Copper Alloy Rotor Bars and End Rings.
    • (VFD) Inverter Duty.
    • Oversized 4532 Alloy High Strength Forged Shaft for Radial Load.
    • OPE Insulated Bearing.
    • Pressurized connection box (IP56) mounted on left side of motor as viewed from non-drive end, with bolt on cable connections and terminations for pressure sensor, thermostat, space heater, lockout switch & blower unit. Connection box can be specified on right side.
    • Blower Assembly; 25hp Explosion Proof, 3 Phase, 60 Hz, 460 Volts.
    • Pressure sensor, Explosion Proof.
    • Lockout Switch, Explosion Proof.
    • Space Heater, 120/240 Volt, Explosion Proof.
    • (6) Winding RTD’s (100 Ohm).
    • Stub Shaft / Encoder Mount optional.
    • Motor Enclosure: IP44.
    • Altitude Below 3,300 FT.
    • Approx. Weight: 8,400 Lbs. 3,810 Kg.
  • HTM1500 AC Drilling Motor
    The Joliet Horizontal AC Drilling Motor delivers a continuous 1500 HP rating for mud pump and rotary table applications and boasts an impressive intermttent rating of 1875HP for drawworks duty....

    • Form Wound.
    • Class 200 Insulation.
    • Copper Alloy Rotor Bars and End Rings.
    • Inverter Duty.
    • Single shaft extension with hub.
    • 4532 Forged High-Strength Shaft.
    • OPE Insulated Bearing.
    • IP44 Enclosure.
    • Pressurized connection box (IP56) mounted on left side of motor as viewed from non-drive end, with bolt on cable connections and terminations for pressure sensor, thermostat, space heater, lockout switch & blower unit. Connection box can be specified on right side.
    • DE- Roller Bearing OPE – Roller Bearing.
    • Blower Assembly; 20hp Explosion Proof, 3 Phase, 60 Hz, 460 Volts, Providing 3900 CFM at 16” Ventilation Air.
    • (6) 100 Ohm Platinum RTD's (2) per phase.
    • Pressure sensor, Explosion Proof.
    • Lockout Switch, Explosion Proof.
    • Space Heater, 120/240 Volt, Exposion Proof.
    • Stub Shaft / Encoder Mount optional.
    • Approx. Weight: 6,950 Lbs., 3,151 Kg.
  • F6000 E-Frac Motor
    6000HP, 3PH, 60HZ, 6600VAC, 1800 RPM, 4 Pole Design, Class H Insulation,
    Horizontal Mounting, Type: EFOAN-KK, 17,523 (Lbs.-Ft.) @ 1800 RPM, IP23W,
    -20° C to +45° C Ambient...

  • Performance Ratings:                                 

    • 6600VAC
    • 470FL Amps, 3ph, 60HZ
    • 4 Pole / 1780RPM 
    • Soft Start
    • Torque capability to meet requirements of load profile, Curves Attached
    • Torque: 17,700 Ft. Lbs. @ Rated Speed