The 2020 contract is now available! Booths 1-500 will be assigned begining March, 25th. 

Gorman-Rupp Pumps  

600 South Airport Rd.
Mansfield,  OH  44903

United States
http://www.grpumps.com
  • Booth: 167

Gorman-Rupp manufactures pumps and pumping equipment that supply large quantities of water for hydraulic fracturing operations, as well as centrifugal pumps used on blending and hydration rigs. They also manufacture a line of solids handling self-priming trash pumps for drilling rig cellar pump out, transferring drilling mud slurries and tank loading.


 Videos

Eradicator Solids Management System
ValuPrime General Purpose Dewatering Pumps

 Press Releases

  • Gorman-Rupp has released additional priming-assisted Final Tier 4 engine-driven products.

    • Prime Aire engine-driven model PA6H60-4045H FT4-ESP is a 8” x 6” (203 mm x 152 mm) priming-assisted, environmental Silent Pump with auto-start that provides flows up to 2,700 GPM (170.3 lps) and heads to 195 Ft. (59.4 m). This model is available in cast iron construction and is designed to pass solids up to 3” (76.2 mm) in diameter. It is powered by a Final Tier 4, liquid-cooled John Deere engine.

    • Prime Aire engine-driven model PA8E60-4045H FT4 is a 8” x 8” (203 mm x 203 mm) priming-assisted pump with auto-start that provides flows up to 3,710 GPM (234 lps) and heads to 205 Ft. (62.5 m). This model is available in cast iron construction and is designed to pass solids up to 3” (76.2 mm) in diameter. It is powered by a Final Tier 4, liquid-cooled John Deere engine.

    • Prime Aire engine-driven model PA4A60C-4LE2T FT4 is a 4” x 4” (102 mm x 102 mm) priming-assisted pump with auto-start that provides flow up to 920 GPM (58.04 lps) and heads to 133 Ft. (40.4 m). This model is available in cast iron construction and is designed to pass solids up to 3” (76.2 mm) in diameter. It is powered by a Final Tier 4, liquid-cooled Isuzu engine.

    • Prime Aire engine-driven model PA4E71C-3TNV88F FT4-ESP is a 4” x 4” (102 mm x 102 mm) priming-assisted, environmental Silent Pump with auto-start that provides flow up to 950 GPM (59.93 lps) and heads to 120 Ft. (36.57 m). This model is available in cast iron construction, fitted with G-R Hard Iron, and is designed to pass solids up to 3” (76.2 mm) in diameter.  It is powered by a Final Tier 4, liquid-cooled Yanmar engine.

    • Prime Aire Plus engine-driven models PAH6A60-6090H FT4 and PAH6A65-6090H FT4 are 10” x 6” (254 mm x 152 mm) priming-assisted pumps with auto-start that provide flows up to 5,100 GPM (321.76 lps) and heads to 352 Ft. (107.29 m). These models have cast iron and duplex stainless steel CD4MCu construction, and are designed to pass solids up to 3” (76.2 mm) in diameter. They are powered by Final Tier 4, liquid-cooled John Deere engines.

    • Prime Aire Plus engine-driven models PAH8A60-6090H FT4 and PAH8A65-6090H FT4 are 10” x 8” (254 mm x  203 mm) priming-assisted pumps with auto-start that provide flows up to 5,300 GPM (334.37 lps) and heads to 344 Ft. (104.85 m). These models have cast iron and duplex stainless steel CD4MCu construction, and are designed to pass solids up to 3” (76.2 mm) in diameter. They are powered by Final Tier 4, liquid-cooled John Deere engines.

    These new Final Tier 4 models are available as skid-mounted or trailer-mounted units.

    For additional information contact Tim Cline (direct line:  419-755-1213; cell: 419-512-3966; e-mail: tcline@gormanrupp.com) or Matt Olivieri (direct line: 419-755-1222; cell: 419-631-9140; e-mail: molivieri@gormanrupp.com).

  • Gorman-Rupp is introducing a new line of cost-effective priming-assisted centrifugal pumps. The ValuPrime™ is a compact and powerful pump ideally suited for the dewatering needs of the construction, industrial, and agricultural markets and was based on the proven technology of the Prime Aire® and Prime Aire Plus® models.

    Featuring model sizes 4” x 4” (100 mm x 100 mm) and 6” x 6” (150 mm x 150 mm), flows to 1520 GPM (95.9 lps), total dynamic head to 150’ (45.7 m) and solids handling capabilities up to 3” (76.2 mm), these pumps provide the high level of performance you’ve come to expect from Gorman-Rupp.  

    The new VPA Series™ pump line comes standard with a 34 gallon fuel tank, programmable control panel, EPA compliant Isuzu Final Tier IV diesel engine, and a one-year factory warranty.  These pumps are ideal for floodwater/storm standby, general job site dewatering, river and dam bypass operations, dust control and for water and street department applications.

    Current models include VPA4A60C-3CH1 FT4 and VPA6A60C-4LE2T FT4.

  • Gorman-Rupp release of priming-assisted and self-priming final Tier 4 engine driven products.

    The Prime Aire engine driven model PA6D60-4045T FT4 is a 6” x 6” (152 mm x 152 mm) priming assisted pump with autostart that provides 2,320 gpm (146.2 lps) and heads to 158 ft. (48 m).This model is available in cast iron construction and designed to pass solids up to 3” (76.2 mm) in diam er. It is powered by a final Tier 4, liquid-cooled John Deere engine.

    The Super T Series engine driven model T6A60S-4045T FT4-ESP is a 6” x 6” (152 mm x 152 mm) self-priming environmental Silent Pump with autostart that provides 1,640 GPM (103.4 lps) and heads to 152 ft. (46.3 m).  This model is available in cast iron construction and designed to pass solids up to 3.0” (76.2 mm) in diameter. It is powered by a final Tier 4 liquid-cooled John Deere engine.

    These new final Tier 4 models are available as skid mounted or trailer mounted units.

    For additional information contact Tim Cline (direct line: 419-755-1213; cell: 419-512-3966; e-mail: tcline@gormanrupp.com).


 Products

  • Super T Series with Eradicator Solids Management
    The Eradicator Solids Management System is designed to handle clog-prone solids. The aggressive self-cleaning wearplate, back cover assembly and lightweight inspection cover keep you operating at peak efficiency....

  • The Eradicator system features an aggressive self-cleaning wearplate incorporating a number of notches and grooves, as well as a patent-pending lacerating tooth, that helps break up stringy materials and pass them through the pump without impacting performance or interrupting service. A special back cover includes a patented lightweight inspection cover that can easily be removed if it is necessary to inspect the impeller. The innovative design greatly reduces troublesome clogging and expensive downtime.

    Easier access to the impeller, increased uptime, improved operational efficiency, reduced maintenance costs and lower life-cycle costs are major benefits of the Eradicator system. no longer does the entire back cover assembly have to be removed to gain access to the impeller, and Eradicator-equipped pumps do not require expensive chopper blades that need periodic replacement. The system is available in cast iron and G-R hard iron configurations and can be factory-equipped in new pumps or purchased as a retrofit kit that is interchangeable with Super T Series pumps currently operating in the field.
  • ValuPrime General Purpose Dewatering Pumps
    Gorman-Rupp’s line of ValuPrime priming-assisted dewatering pumps is designed to dewater your job site without taking a chunk out of your bottom line....

  • For applications not requiring higher head and flow, VPA Series pumps offer the same quality components you’ve grown to expect from the experts at Gorman-Rupp.

    ValuPrime pumps are available in 4” and 6” configurations and can handle solids up to 3” in diameter. Each model comes equipped with the latest in Tier IV engine technology and provide flows up to 1520 GPM and heads up to 150’.

    VPA Series pumps are ideal for a variety of applications including general job site dewatering, flood/stormwater standby, bypass operations, dust control and for water/street departments. They are also available with a D.O.T.-approved wheel kit or drag base for easier portability around the job site.

  • Self-Priming Centrifugal Pumps
    In 1933, Gorman-Rupp developed its first self-priming centrifugal pump to provide our customers with a durable, reliable pump that could perform in a challenging environment....

  • Gorman-Rupp self-priming centrifugal pumps are easy to install and service. Because they are self-priming, they can be mounted high and dry with only a suction line in the liquid being pumped. If service of maintenance is required, it can be completed quickly and easily. Pumps are available as basic units for connection to your power source or engine mounted.

    We are most known for our Super T Series and Ultra V Series self-priming, solids-handling trash pumps. Both handle up to 3” diameter spherical solids. They are extremely reliable and automatically return to operation after an interruption in liquid or power supply.

  • Shield-A-Spark Flammable Liquid-Handling Pumps
    Gorman-Rupp 80 Series self-priming centrifugal, engine-driven flammable liquid-handling pumps are the safest way to handle a hazardous pumping operation....

  • Shield-A-Spark pumps feature a spark and splash shielded engine, muffler and fuel cap. Four models are available in 2” and 3” discharge sizes and are capable of delivering up to 395 GPM and heads up to 140’. Gasoline- and diesel-driven units are available and include non-combustible air filters and long-life valves. All diesel-driven models are equipped with the latest engines that meet Tier IV emission regulations.

  • Roto-Prime Priming-Assisted Petroleum Pumps
    Roto-Prime priming-assisted centrifugal pumps are specifically designed for pumping petroleum products, petrochemicals and solvents....

  • Roto-Prime pumps are actually two pumps in one: a variable capacity vane pump used during the priming cycle, and a standard centrifugal pump to move the liquid.

    Whenever air or vapor is present at the start of the pumping operation – or when there is a loss of suction because of air or vapor during pumping – the priming pump automatically moves air and vapor from the suction line to discharge line. Once the flowing liquid from the centrifugal portion of the pump builds up sufficient pressure in the discharge system, the pressure backs up through a tube to act on the bottom of the priming pump’s movable slide block, placing it in a neutral position during normal operation.

    Gorman-Rupp Roto-Prime pumps are ideal for loading and off-loading transports and stripping hoses.

  • Positive Displacement Rotary Gear Pumps
    The Gorman-Rupp line of positive displacement rotary gear pumps is designed to provide performance no other pumps can match....

  • G Series rotary gear pumps are versatile enough to handle a wide range of liquids from thin, clear to thick, viscous fluids. They are manufactured with unique features that enable them to perform better and last longer, providing the quality and reliability that make them the premier gear pump in the oil and gas industry.

    Gorman-Rupp rotary gear pumps excel in chemical transfer, tank bottom recirculation, tank loading/offloading and a variety of other oil and gas applications.
  • Prime Aire & Prime Aire Plus Priming-Assisted Pump
    Gorman-Rupp priming-assisted pumps are the perfect solution for applications where intermittent flow could be a problem....

  • PA Series and PAH Series priming-assisted pumps feature the Gorman-Rupp positive priming system that allows the pumps to run dry continuously without causing damage. The venturi compressor priming system virtually eliminates leaks, reducing environmental concerns and giving the unique capability to operate under flooded-suction staging conditions.

    Prime Aire priming-assisted (dry prime) pumps are hard-working, dependable and ready to tackle the toughest applications including large solids and slurries. Their positive priming capabilities make them the perfect solution for instances where a large volume of air is in the liquid being pumped, there are intermittent flows or there are long or oversized suction lines.

    Prime Aire Plus models are engineered for the most rugged and demanding oil and gas industry applications. Increased head, flow and enhanced maintenance features are additional benefits over the Prime Aire line. Models are available in sizes up to 16” and are suitable for clear liquids and liquids containing large solids.

    All PA and PAH Series pumps are backed by an industry leading two-year warranty and are factory tested before they leave the Gorman-Rupp facility. Prime Aire and Prime Aire Plus pumps are configured with EPA Tier compliant engines or premium efficiency motors.


Send Email

Type your information and click "Send Email" to send an email to this exhibitor. To return to the previous screen without saving, click "Reset".


Visit the Exhibitor Resources Page to:

  • Read OTC Rules and Regulations
  • Manage/Designate EAC's
  • Submit contractor orders: Carpet, Decor, Electrical, Shipping, Audio Visual, Etc.
  • See a list of deadlines
  • View the Target Move-in maps

Please contact otc.events@otcnet.org for questions.
For technical assistance or upgrade questions please contact: support.