Flli. Righini SRL

Via M. Travaglini 21
Ravenna,  48122

Italy
http://www.righiniravenna.it
  • Booth: 3145

F.lli Righini is leading in the offshore industry for a wide range of products and solutions such as: pipe laying and handling systems, friction clamps up to 2000 mT, laying systems for umbilicals and flexibles, mooring tensioning systems and riser pull in systems for FPSOs, linear winches, davit cranes for tie-in, bear cages and pile lifting tools (ILTs and ELTs), hydraulic power systems and control systems.


 Press Releases

  • The good coopertaion started in 2017 between Heerema Marine Contractors (HMC) and F.lli Righini Srl, witn the supply of  No. 4 External Lifting Tools, having capacity 2.000 mT each, for the succesful removal of Murchison Platform (CNR International) in the North Sea and now assets of HMC, is continuing with a new contract for the design and manufacture of  No.4 Internal Lifting Tools, capacity 3.800 mT each, that will also become assets of HMC and will be used for the removal of some platforms on the Sable Field (SOEP) in Nova Scotia.

    The 4 ILTs in subject will be the most performing tools available on the market.

    F.lli Righini would like to take the opportunity to thank HMC for the confidence and looks forward to the good continuation of a positive business relationship.


 Products

  • Hydraulic Friction Clamps
    F.lli Righini has the capability to design and manufacture a wide range of Hydraulic Friction Clamps (TRAC, HOC and Safety Clamps) up to 2000 mT capacity, complete with HPU and control system....

  • The hydraulic friction clamps normally used for pipes in J-lay configuration, can be designed with or without the related stingers, and hang off modules/tables. Usually the calmps can handle a wide range of pipe diameters and  F.lli Righini Srl have so far supplied all the main pipe lay contractors. The clamps are normally equipped with HPU and control system and the design is optimized according to the client requirements and the ship configuration where the same have to be installed in order to achieve the best performance. 
  • Riser Pull-in Systems for FPSO
    Riser Pull-in Systems can be designd and manufactured in different configurations according to the load and typology of risers to be installed....

  • Riser Pull-in Systems (RPS) are usually installed on a balcony located on the side shell of the spread moored FPSO and are mainly composed of a main winch (linear or drum type), two auxiliray winches (linear or drum type), diverting sheaves, crane to assist operations and maintenance, as well as all the needed ancillaries to perform the operations. The RPS can be wire rope type or chain type (in this case the main winch is  chain jack type) according to the typology of riser to be pulled (flexible of  rigid). All the RPS are supplied on turn key basis and are equipped with hydraulic power unit (electrically supplied or with diesel moto-generator) and control system.
  • Umbilicals and Flexibles Laying Systems
    Complete packages for Umbilicals and Flexibles Laying and Transpooling Systems can be designed and manufactured according to client and products specifications as well as sea state conditions....

  • The Handling and Laying packages are usually composed of carousels (sprocket or basket type) with related spooling towers and tensioners, laying towers (horizontal or vertical) with related tensioners, safety clamps, hydraulic power units, control system and all accessories for the transpooling and laying of the products. Along the years many packages, with tailored design according to products, environmental and project specifications, for onshore and offshore application have been suppied to the main international contractors and operators.
Please contact otc.events@otcnet.org for questions.
For technical assistance please contact: support.