The 2020 contract is now available! Booths 1-500 will be assigned begining March, 25th. 

E.H. Wachs

600 Knightsbridge Pkwy.
Lincolnshire,  IL  60069

United States
http://www.ehwachs.com
  • Booth: 1501

E.H. Wachs is the premier manufacturer of field portable O.D. and I.D. mounted weld prep machine tools, designed for onsite cutting, squaring, beveling, facing and wellhead completion. O.D. mounted machine tools include our DynaPrep MDSF Split Frame system, the Guillotine® Pipe Saws and our famous Trav-L-Cutter®. 


 Products

  • ECC External Casing Cutter
    Wachs ECC External Casing Cutter utilizes DynaPrep MDSF Split Frame technology to cut casing conductors externally above the wellhead. The ECC mounts around the exposed casing and simultaneously cuts and chamfers prior to fitting the BOP....

  • Wachs ECC External Casing Cutter Kit utilizes our proven DynaPrep MDSF Split Frame technology to cut a wide range of casing conductors externally above the wellhead. The ECC split frame mounts around the exposed casing OD above the wellhead requiring minimal axial and radial clearances. It simultaneously cuts and chamfers prior to fitting the BOP. Ring sizes are available for most grades and weights of the exposed external casing (or drive pipe/conductor) up to a 14in (356mm) diameter.

    The ECC takes advantage of the wide range of standard Genuine Wachs Tooling. The ECC kit includes a right angle pneumatic drive, ATM Air Treatment Module and Front Drive Pinion Housing. Remote hand held controls via the ACM Air Control Module are optionally available. ECC kits are available in four standard ring sizes, featuring interchangeable tool slides and machine drives to cut and bevel all wellhead casing grades, sizes and weights from 4.5in to 13 3/8in OD (with larger sizes available by special order).
  • EICC External Internal Casing Cutter
    Wachs EICC External Internal Casing Cutter Kit is designed to cut and chamfer the casing internally below the wellhead, and can be configured to cut down to a depth of 60in (1524mm)....

  • Wachs EICC External Internal Casing Cutter Kit is designed to cut and chamfer the casing internally below the wellhead, required for specific BOP installations. It is used in combination with an ECC which makes the external cut required before installing the EICC. The ECC cuts up to 7in through 13 3/8in API casing, and utilizes standard Wachs tooling for external severing. Once the external cut is made, the MDSF split frame from the ECC Kit serves as the drive platform for the EICC.
     

    A wellhead adaptor is required to mount the MDSF, either our Universal adapter or a custom adapter built to your specifications, serving as the mounting point between the wellhead and the MDSF. The EICC is assembled to the MDSF and lowered into the casing, and can be configured to cut down to a depth of 60in (1524mm). The EICC utilizes a casing cutter tooling holder and insert arrangement for a lower cost per cut.  A reversing air motor is required and part of the EICC Kit, running forward to advance the tooling, then backwards to retract the tooling prior to extraction and completion.

  • Weld Crown Removal WCR Module
    E.H. Wachs WCR Weld Crown Removal module for the DynaPrep MDSF provides a low clearance solution for removing pipe weld crowns, in the field or fab shop. This module attaches to the DynaPrep MDSF Split Frame without any modifications needed. T...

  • E.H. Wachs WCR Weld Crown Removal module for the DynaPrep MDSF® provides a low clearance solution for removing pipe weld crowns, in the field or fab shop. This module attaches to the DynaPrep MDSF Split Frame without any modifications needed. The WCR module advances the tooling axially as the MDSF, serving as the drive platform, rotates radially.

    With a 3.75in ((95mm) tooling stroke and a 2.5in (63mm) slide mounting stroke, the WCR offers up to a total of 6.25in (158mm) of axial stroke, large enough for even the widest weld crown. The module can be positioned radially at any of six mounting positions, giving a radial mounting range of 3in (76mm) for maximum versatility.

Visit the Exhibitor Resources Page to:

  • Read OTC Rules and Regulations
  • Manage/Designate EAC's
  • Submit contractor orders: Carpet, Decor, Electrical, Shipping, Audio Visual, Etc.
  • See a list of deadlines
  • View the Target Move-in maps

Please contact otc.events@otcnet.org for questions.
For technical assistance or upgrade questions please contact: support.