AGC Chemicals Amercias, Inc.

55 E. Uwchlan Avenue
Exton,  PA  19341

United States
http://www.agcchem.com
  • Booth: 2405

AGC Chemicals Americas manufactures, markets and sells a variety of fluoroproducts ideal for demanding oil and gas industry applications. We are featuring: 

  • AFLAS® fluoroelastomer pre-compounds that enhance the performance of of equipment parts
  • Fluon+™ Modified PEEK that provides high-temp insulation for cables and wirelines
  • Fluon+™ Compounds that improve the performance of equipment components


 Products

  • AFLAS® CP-4000 Fluoroelastomer Pre-Compound
    When oilfield equipment components are made with AFLAS CP-4000, they impart outstanding chemical resistance, oil resistance, solvent resistance, ultra-high heat resistance, compression set, mechanical strength and processability....

  • To meet the challenges of operating in harsh oil and gas environments, AGC Chemicals Americas offers AFLAS® CP-4000, which is a peroxide-curable pre-compound in the AFLAS perfluoroelastomer (FFKM) series. When oilfield equipment components are made with AFLAS CP-4000, they impart outstanding chemical resistance, oil resistance, solvent resistance, ultra-high heat resistance, compression set, mechanical strength and processability.

    It can be compounded to be highly resistant to rapid gas decompression and has a service temperature of 280 °C, with peak exposure of 300+ °C. AFLAS CP-4000 is post-cured using nitrogen instead of air to achieve high-temperature resistance and to optimize performance.

    Premium components formulated with AFLAS FFKMs last longer in critical applications, which reduces downtime and improves oil and gas production.

    For more information, please visit booth 2405 at the NRG Center during OTC, May 6-9, go to AFLAS Fluoroelastomers or call toll-free (in the U.S.) at 1-800-424-7833 to speak with a technical sales representative.

  • Fluon+™ Modified PEEK
    AGC Chemicals Americas' developed Fluon+™ modified PEEK with specialty fluoropolymers to improves performance properties of equipment parts....

  • To meet the challenges of operating in harsh oil and gas environments, AGC Chemicals Americas has developed Fluon+™ modified PEEK with specialty fluoropolymers to improve its impact strength, wear resistance, flexibility and electrical insulating properties. Fluon+ modified PEEK retains mechanical properties at high temperatures up to 200 °C.

    Insulation enhanced with flexible Fluon+ modified PEEK enables tubulars and wirelines to last longer in critical applications, reducing downtime and improving oil recovery production. Modified PEEK also demonstrates a lower dielectric constant than standard PEEK at high temperatures up to 200 °C. Fluon+ modified PEEK is also ideal for impact resistance applications such as valve seats, compressor plates and poppet valves.

    For more information, please visit booth 2405 at the NRG Center during OTC May 6-9 or call toll-free (in the U.S.) at 1-800-424-7833 to speak with a technical sales representative.

  • Fluon+™ Compounds
    Fluon+™ brand products from AGC Chemicals provide value-added material science solutions by creating virtually any enhanced polymer through the addition of reactive functionality, pigments, reinforced fillers, flexibility and more....

  • Fluon+ Melt Processable Compounds are reinforced with proprietary conductive, strengthening and reinforcing fillers and are ideal for a wide variety of applications including wire and cable coatings; semiconductor and electronic components; valves, fittings and pump housings; and tubing and pipe. AGC uses FEP, ETFE, ECA, PFA, PVDF, MFA and ECTFE resins to produce Fluon+ melt processable compounds, which can be processed using extrusion, injection and compression molding techniques.

    Fluon+ Filled PTFE Compounds provide enhanced deformation and creep resistance, thermal conductivity and wear performance over traditional PTFE resins. These engineered fluoropolymer compounds play an important role in oil and gas exploration and recovery because they improve the performance properties of parts and components in severe operating conditions. Fluon+ filled PTFE compounds impart characteristics that are vital for components such as bearings, seals and gaskets used in applications where they need to withstand ongoing heat, pressure and dynamic environments.

    Fluon+ Adhesive Grades are made with Fluon ETFE or PFA and are used in applications requiring strong adhesion to polyamide polymers like nylon 12 for applications such as electronics materials, coatings, fuel hoses, multilayer films and linings. They exhibit superior chemical and reliable permeation resistance to many fluids and gases, especially in transportation and industrial applications.

    Fluon+ Modifiers are used for engineered plastics and continuous fiber-reinforced composites. Our fluorinated modifiers are added to plastics, metal and carbon fibers to enhance their performance characteristics.

    Fluon+ Flexible Compounds are made from engineered plastics and proprietary fluoroelastomers to provide added flexibility. They are ideal for wire and cable used in motor vehicles, aerospace and appliances as well as for film and sheet, tubing and pipe insulation, and electronic components.

    For more information about Fluon+ Compounds, please visit https://www.agcchem.com/products/fluon-compounds/ or call toll-free (in the U.S.) at 1-800-424-7833 to speak with a technical sales representative.

Please contact otc.events@otcnet.org for questions.
For technical assistance or upgrade questions please contact: support.