CAPE Holland

Romhof 5
Beilen,  9411SB

Netherlands
http://www.cape-holland.com
  • Booth: 1539

CAPE Holland is the world leading provider of offshore Vibro Piling solutions. Its unique Vibro Lifting Tool (VLT) is a vibratory Hammer and certified lifting tool hybrid, which is able to upend a pile, lift it to the seabed and start installing straight away. All this without any tool changes, guide frames or noise mitigation. This innovative cost saving equipment can greatly reduce installation time.


 Products

  • CV-80 VLT-U
    The CV-80 VLT-U is a compact Vibro Lifting Tool (VLT) for pile sizes in the range of 30-84" and weighing up to 100 Te....

  • The CV-80 VLT-U is a compact Vibro Lifting Tool (VLT) for pile sizes in the range of 30-84" and weighing up to 100 Te. The CV-80 VLT-U is able to upend, handle and install anchor piles, jetty piles etc, including subsea. The CV-80 VLT-U is also regulary to remove stuck followers when used to impact drive piles to below seabed. CV-80 fits into a regular 20ft container and can be driven from either a CAPE Holland Power Unit or a Power Unit for Hydraulic Impact Hammer in combination with a < 10ft VLT auxiliary Power Unit for additional functions. This is ideal for jobs where the Vibro Lifting Tool and Impact Hammers are used without the need for 2 Power Unit spreads. For more information please send an email to info@cape-holland.com or visit our booth. 
  • SINGLE CV-320 VLT-U
    The SINGLE CV-320 VLT-U is a Vibro Lifting Tool (VLT) for pile sizes in the range of 60-232" and weighing up to just over 400 Te....

  • The SINGLE CV-320 VLT-U is a Vibro Lifting Tool (VLT) for pile sizes in the range of 60-232" and weighing up to just over 400 Te. The CV-320 VLT-U  is a modular desing which can be configured from a SINGLE unit for piles starting at 60" to a multiple unit for XXL Monopiles (> 6.5m diameter). The SINGLE unit is able to upend, handle and install anchor piles, mooring piles, skirt piles, pin piles etc, including subsea. The whole VLT range is certified as a lifting tool under the Lloyd's Register Code for Lifting Appliances in a Marine Environment (CLAME). 

    For more information please send an email to info@cape-holland.com or visit our booth.

  • QUAD CV-320 VLT-U
    The QUAD CV-320 VLT-U is a Vibro Lifting Tool (VLT) specifically for the upending, handling and installation of large Monopiles, weighing up to 1600 Te....

  • The QUAD CV-320 VLT-U is a Vibro Lifting Tool (VLT) specifically for the  upending, handling and installation of large Monopiles, weighing up to 1600 Te. The CV-320 VLT-U  is a modular desing which can be configured from a SINGLE unit for piles starting at 60" to multiple units for XXL Monopiles (> 6.5m diameter). The QUAD unit is able to upend, handle and install Monopiles from 4m diameter onwards, including subsea. The whole VLT range is certified as a lifting tool under the Lloyd's Register Code for Lifting Appliances in a Marine Environment (CLAME). 

    For more information please send an email to info@cape-holland.com or visit our booth.

Please contact otc.events@otcnet.org for questions.
For technical assistance or upgrade questions please contact: support.