E.H. Wachs

600 Knightsbridge Pkwy.
Lincolnshire,  IL  60069

United States
847-537-8800
847-520-1147
http://www.ehwachs.com
  • Booth: 1201


Pipe Cutting, Weld Prep & Wellhead Completion Machine Tools

E.H Wachs manufactures cold cutting machine tools designed for onshore and offshore pipe cutting, weld prep beveling and wellhead completion. Products include split frames, end prep machines, external/internal casing cutters and handheld valve operators. Also Aqua Tech for diamond wire saws and subsea cutting solutions. Learn more at ehwachs.com


 Products

  • ECC and EICC Casing Cutting Machine Tools
    ECC External Casing Cutter and EICC External Internal Casing Cutter for wellhead completion. The ECC externally cuts & chamfers casing conductors above the wellhead, the EICC adds an internal cutter that ID cuts & chamfers below the external casing cut....

  • E.H. Wachs ECC External Casing Cutter Kit utilizes Wachs proven DynaPrep MDSF split frame technology to cut a wide range of casing conductors externally above the wellhead. The ECC split frame mounts around the exposed casing OD above the wellhead and simultaneously cuts and chamfers prior to fitting the BOP. Ring sizes are available for most grades and weights of the exposed external casing (or drive pipe/conductor) up to a 26in (660 mm) diameter.

     

    ECC kits are available in 6 standard ring sizes, featuring interchangeable tool slides and machine drives to cut and bevel all wellhead casing grades, sizes and weights from 4 ½in to 26in OD (with larger sizes available by special order). The ECC is portable, compact, lightweight and requires minimal axial and radial clearance. A single operator can setup and machine the casing for minimal open time. The ECC takes advantage of the wide range of standard Genuine Wachs Tooling. It requires minimal axial and radial clearances, and is available with pneumatic or hydraulic drive. Remote hand held controls are optionally available.

     

    ECC External Casing Cutter Features

    ·          External casing (drive pipe/conductor) cutting and beveling up to a 26in (660 mm) diameter

    ·          Utilizes standard Wachs Genuine Tooling for severing and chamfering

    ·          Based on Wachs field proven Split Frame technology

    ·          Requires minimal axial and radial clearances; hydraulic or pneumatic drive

    ·         Dedicated DuoEdge Casing Cutting Tool Holder & Insert

    ·         Simultaneously cuts & bevels casing

    ·         ECC can be used inverted for cut lines close to the flange

    ·         ECC low clearance design fits into tight operating envelope

     

    E.H. Wachs External/Internal Casing Cutter (EICC) kit accommodates a wide range of casing diameters above the wellhead and ID cuts below. Splitting to mount around the casing OD above the wellhead, the MDSF split frame serves as the foundation of the EICC. Requiring minimum axial and radial clearance, the EICC can be setup and will cut casing above the wellhead in less than 30 minutes. An internal parting and bevel attachment mounts to the LCSF or DynaPrep MDSF rotating ring for cutting and/or beveling the internal casing below the wellhead. Because of its ability to cut at various depths, the time the wellhead must remain open is greatly reduced.


    EICC External Internal Casing Cuter Features

    ·         Cuts up to 7in through 13 3/8in API casing.

    ·         Utilizes standard Wachs Genuine Tooling for external severing and chamfering

    ·         Optional specialized casing cutter tooling holder and inserts available

    ·         Based on the Wachs field proven LCSF & DynaPrep MDSF split frame

  • EP 424 End Prep Machine Tool
    E.H. Wachs EP 424 is an ID mount end prep machine tool designed to bevel, compound bevel, J-prep, face and counterbore pipe, fittings and valves. Available with industry exclusive SpeedPrep® auto feed system, it preps a range of OD 4in – 24in (DN100-400)....

  • E.H. Wachs EP 424

    Prior to the EP 424, most end prep machines required a mechanical template or incline tool slide to reproduce the specific and complex preps called for by today’s processes. With Wachs SpeedPrep® auto feed system it’s now possible to dial in the exact prep needed for your application. Select the bevel angle and the land that works best for your application, without work stoppages or additional components.

    More versatile and powerful than any other machine of its kind, the Wachs EP 424 sets the standard in user friendly large diameter end prep machines.

    EP 424 Features

    •        Safe cold cutting process, eliminates heat affected zone
    •        Lathe machining delivers precise compound bevels and consistent lands
    •        EP 424 eliminates the need for accessory templates or external tool slides
    •        Fast setup and prep with standard self-centering mandrel legs
    •        Corrosion resistant finishes on all components for extreme environments
    •        Fully enclosed bearings and drive gears for safety and durability
    •        Hardened alloy steel components, larger gear sets for high work loads
    •        Lightweight yet rigid aluminum housing enhances portability
    •        Low friction bearing system provides maximum stability, eliminating chatter

    EP 424 Design Capabilities

    •        Machine perfect preps from OD 4in - 24in (DN100 - 600)
    •        Form tool pipe from OD 4in - 14in (DN 100-350)
    •        Single point machining from OD 8in - 24in (DN 100-600)
    •        Single point Up to 36in (DN 900) with optional slide
    •        Fully modular construction for one man set-up and operation


Send Email

Type your information and click "Send Email" to send an email to this exhibitor. To return to the previous screen without saving, click "Reset".


Please contact otc.events@otcnet.org for questions.
For technical assistance please contact: support