Costacurta S.p.A-VICO

via Grazioli 30
Milan,  Italy  20161

Italy
00390266202066
http://www.costacurta.it
  • Booth: 3251


Welcome to Costacurta’s Separation Technology

Costacurta S.p.A-VICO is an Italian company specialized in the design and manifacture of metal components for the oil & gas, petrochemical and chemical industries. Costacurta offers separation internals and solutions, engineering services as well as reactor internals manufactured in accordance with the specifications of major technology licensors.


 Products

  • vertical gas-liquid separator
    Typical vertical gas-liquid separator equipped with vane inlet distributor, wire mesh pad agglomerator and axial flow multicyclones....

  • Typical vertical gas-liquid separator equipped with vane feed inlet distributor, wire mesh pad agglomerator (VICO-Tex) and axial flow multicyclones (VICO-Spin). The combination of VICO-Tex wire mesh agglomerator and VICO-Spin axial flow multicyclones presents three main benefits:  - compact dimension, - high separation performances thanks to the agglomeration effect of the wire mesh pad - high turndown ratio: at high gas velocities the wire mesh pad acts as agglomerator and the VICO-Spin separates the agglomerated droplets, at low gas velocities the wire mesh pad operates as separator and the VICO-Spin performs the final separation. This combination of internals is widely used in gas compression trains or for retrofitting of existing equipment.

  • Horizontal gas-liquid-liquid separator
    Typical horizontal gas-liquid-liquid separator equipped with cyclonic inlet distributor, perforated plate calming baffle, plate-pack, anti-turbulence slats, straightener, vane-pack droplet separator and sand jetting systems....

  • Typical horizontal gas-liquid-liquid separator equipped with cyclonic inlet distributor, perforated plate calming baffle, plate-pack (VICO-Pack), anti-turbulence slats, straightener (VICO-Straightener), vane-pack (VICO-Vane) droplet separator and sand jetting systems. Horizontal gas-liquid-liquid separators equipped with this combination of internals are widely used when gas and liquid loads are quite high and the separation of liquid-liquid primary dispersion is required. This is particularly suitable for offshore and FPSO application and for retrofitting of existing equipment.
  • Horizontal liquid-liquid separator
    Typical horizontal liquid-liquid separator equipped with perforated pipe inlet distributor, perforated plate calming baffle and plate-pack....

  • Typical horizontal liquid-liquid separator equipped with perforated pipe inlet distributor, perforated plate calming baffle and plate-pack (VICO-Pack). The presence of a VICO-Pack allows treatment of a slightly foul fluid stream. In the case of clean fluid, a wire mesh coalescer (VICO-Tex COALESCER) instead of a plate-pack allows higher separation performances to be obtained.

Send Email

Type your information and click "Send Email" to send an email to this exhibitor. To return to the previous screen without saving, click "Reset".


Please contact otc.events@otcnet.org for questions.
For technical assistance please contact: support