FORITEX S.r.l.

Via Emilia Piacentina, 12
Sarmato,  PC  29010

Italy
+390523886164
+390523886171
http://www.foritex.it
  • Booth: 8231

FORITEX has been serving the Oil & Gas (On-shore, Off-shore & Subsea), Power and Process Industries for over 35 years. FORITEX designs, produces and supplies piping components, forgings and pipe spools and can offer professional engineering support with design, calculation, analysis and verification with CAD and latest 3D solid modeling software.


 Press Releases

  • FORITEX has been serving the Oil & Gas (onshore, offshore, sub-sea), Power Plants (conventional and nuclear) and Process & Chemicals Industries for 35 years.

    FORITEX designs, produces and supplies piping components, forgings and pipe spools.

    Our own production of non-standard piping components and piping fabrication/assembly, coupled with our extensive and close network with manufacturers and stockists give FORITEX the capability to offer comprehensive project piping packages,

    FORITEX can offer professional engineering support to cover specific project requirements, and can assist clients in all aspects of design, calculation, analysis and verification.

    FORITEX makes use of CAD (Computer Aided Design) and latest 3D solid modeling software (with Finite Elements Analysis) in its design processes, and if required, design can be verified by accredited third party.

    To better understand FORITEX’s capabilities, visit our website at www.foritex.it.


 Products

  • 20 inch PIGGABLE WYE with pipe pups + hydrotest
    Design and Fabrication c/w FINITE ELEMENT ANALYSIS of 20 INCH ASYMMETRICAL PIGGABLE WYE...

  • Design and Fabrication c/w FINITE ELEMENT ANALYSIS of 20 INCH ASYMMETRICAL PIGGABLE WYE

    Material: ASTM A350 LF2 Cl.1 plus welding of PIPE PUPS of material grade L360MB.

    Hydrotest on final assembly at 190 Barg for 4 hours

    Coating: Fusion bonded epoxy total DFT 250 μm

    Project:  STUBLACH GAS STORAGE FACILITY - PHASE 2 Project - UK

  • 10 & 16 inch BALL / MISALIGNMENT FLANGES
    Design and Fabrication c/w FINITE ELEMENT ANALYSIS of 10 & 16 inch BALL / MISALIGNMENT FLANGES...

  • Design and Fabrication c/w FINITE ELEMENT ANALYSIS of 10 & 16 inch BALL / MISALIGNMENT FLANGES

    Material:  ASTM A694 F60 + Inconel 625 W/O of RJ groove

    Hydrotest on flange assembly at 37.5 Bars for 2 hours

    Coating: Fusion bonded epoxy total DFT 250 μm

    Project: PETROVIETNAM - DAI HUNG GAS GATHERING PROJECT - VIETNAM

  • 26 inch BARRED TEE A860 WPHY65 with hydrotest
    Supply of BARRED TEE - 26” (40 mm wt) x 24” (34.93 mm wt)...

  • Supply of BARRED TEE 26” x 26” X 24” (Unequal)
    26” (598 mm ID, 40 mm wt, 678 mm OD ) x 24” NPS (34.93 mm wt)

    c/w 26" TEST RINGS for welding qualification

    Material: ASTM A860 WPHY65 WELDED Impact tested at -50°F

    Hydrotest at 340 Barg for 1 hour minimum

    Project: BPTT Angelin Project - Trinidad and Tobago


Send Email

Type your information and click "Send Email" to send an email to this exhibitor. To return to the previous screen without saving, click "Reset".


Please contact otc.events@otcnet.org for questions.
For technical assistance please contact: support