Weidmuller

821 Southlake Blvd.
Richmond,  VA  23236

United States
804-379-6027
804-379-2593
http://www.weidmuller.com
  • Booth: 2609

Weidmuller offers industrial electronics, network infrastructure components and connectivity solutions such as Wireless I/O, Industrial Ethernet, Signal Conditioning, Power Supplies, Heavy Duty Connectors, Terminal Blocks, Costume enclosures, complete DIN-Rail assemblies and costume electronic solutions especially where the focus is on safety.


 Press Releases

  • RICHMOND, VA (December 4, 2017) — Weidmuller introduces a new addition in the Klippon® Connect portfolio of products and services for panel building– maxGUARD. With maxGUARD, the electronic load monitoring ELM devices combined with distribution terminal blocks can be customized to provide selective load protection in 24V DC power distributed systems for industrial automation applications. With combining load monitoring and potential distribution into one complete solution, this offers users time-savings during installation, increased safety against failure, and DIN-rail space savings while being highly service friendly.

    The modular maxGUARD system is designed to meet specific requirements for automation control panels. It contains three main cross-connection channels– positive, negative and internal signaling. This design increases the number of possible contacts from the electronic load monitoring device outputs (positive and negative) into the terminal blocks, providing efficient connections for the distribution board loads, as well as reduced wiring. Integrated test points in maxGUARD’s terminals and a disconnect lever for load circuit galvanic isolation helps to simplify testing and troubleshooting.

    Available in a range of single-channel and four-channel variations (both standard and conformal coating), maxGUARD provides application flexibility for custom solutions. The space-saving maxGUARD modules have a 6.1mm housing and feature push-in connection technology. The rated operating voltage is 24V DC, and the complete system has a maximum current capacity of 40A. The wide operating temperature range extends from -25°C to +55°C (without derating). The terminal cross-sections are 16mm² for the feed-in module, 2.5mm² for the electronic load monitoring (ELM), and 1.5mm² at the top and 2.5mm² at the bottom of the potential distribution terminal block. maxGUARD modules are cULus listed, Class 2 Certified (1A, 2A and 4A modules), CE rated and carry a wide range of global approvals. maxGuard can be pre-configured using the Weidmuller Configurator, a free software download available on the Weidmuller website.

    Weidmuller supports customers and partners around the world with products, solutions and services in the industrial environment of power, signal and data. The company develops innovative, sustainable and useful solutions that set standards in Industrial Connectivity today and continually work toward providing solutions for the technology challenges of tomorrow. The Weidmuller Group owns manufacturing plants, sales companies and representatives in more than 80 countries.

    Weidmüller – electrical connection, transmission and conversion of power, signals and data in the industrial environment. – Let’s connect.

  • RICHMOND, VA (November 15, 2017) —Weidmuller introduces their Klippon® Connect A-Series Universal modular terminal blocks. The Klippon® Connect A-Series Universal range includes feed-through, multi-tier distribution, PE, fuse, test disconnect and neutral conductor disconnect terminals blocks. In addition to the new A-Series Universal range, Weidmuller is launching a new A-Series Application range of products designed specifically for use in recurring control panel applications that include voltage/current transformer wiring, control voltage distribution, motor wiring, signal wiring, and initiator/actuator wiring.

    The A-Series Universal modular terminal blocks offer increased efficiency and flexibility for control panel application. Key features include:

    • Integrated push-button clamp actuator for safer wiring and simple handling;
    • Uniform integrated test point for easy continuity and potential/current checks;
    • Current identification area on jumpers;
    • Spring-loaded mounting foot to compensate for rail size fluctuations;
    • Multiple marking areas;
    • Two integrated jumpering channels;
    • Full range of pluggable terminal configurations

    The A-Series Application range offers users custom-fit control panel solutions to help increase productivity for recurring applications. Weidmuller has identified and developed the Application range with product functions that are structured and adapted to specific requirements of panel building. Using the Weidmuller Configurator, a free software download available on the Weidmuller website at http://www.weidmuller.com/weidmullerconfigurator, users can plan, select and order the exact A-Series Application products needed for their recurring control panel applications.

    Weidmuller supports customers and partners around the world with products, solutions and services in the industrial environment of power, signal and data. The company develops innovative, sustainable and useful solutions that set standards in Industrial Connectivity today and continually work toward providing solutions for the technology challenges of tomorrow. The Weidmuller Group owns manufacturing plants, sales companies and representatives in more than 80 countries.

  • RICHMOND, VA (March 13, 2018) —Weidmuller introduces their Klippon® Connect A-Series Application Range modular terminal blocks. Featuring push-in technology, the new A-Series Application Range products are designed specifically for use in recurring control cabinet applications to help increase efficiency and safety, and reduce costs. This range includes terminals for voltage/current transformer wiring, signal wiring, control voltage distribution and power distribution.

    The A-Series Application Range offers users custom-fit control panel solutions to help increase productivity and significantly reduce cabinet space when compared with traditional terminal set-ups. The initiator-actuator terminal blocks offer increased wiring density with up to four different potentials in a 3.5mm (0.14”) width. The range includes modular terminals for connecting two to four conductor sensors or actuators with and without ground connection points. Solid and stranded wires with wire-end ferrules can be connected quickly and reliably with a PUSH IN connection­­– no tools required. The connection system is color-coded to minimize the chance of incorrect connections and help make installation and maintenance more efficient. In addition, each contact point has a corresponding test point where test plugs may be inserted. This enables testing of the different potentials at each contact point to help reduce test time in the control cabinet.

    The A-Series Application Range allows for clear and compact set-ups for control voltage distribution purposes and can be specified to individual machine types. A standardized distributor terminal block design and simple cross-connection options help save space and prevent incorrect wiring. Two possible set-ups – alternating and grouped – increase flexibility. The alternating set-up features two different potentials on one terminal, providing space-savings compared with conventional set-ups. Clear contact assignment and individual contact points help simplify maintenance and modification tasks. The structured block solution can be easily combined with modular terminal blocks of the same size, and uses standard accessories. Additional terminal blocks are easily added using a second cross-connection channel.

    Using the Weidmuller Configurator, a free software download available on the Weidmuller website at http://www.weidmuller.com/weidmullerconfigurator, users can plan, select and order the exact A-Series Application products needed for their recurring control panel applications.

    Weidmuller supports customers and partners around the world with products, solutions and services in the industrial environment of power, signal and data. The company develops innovative, sustainable and useful solutions that set standards in Industrial Connectivity today and continually work toward providing solutions for the technology challenges of tomorrow. The Weidmuller Group owns manufacturing plants, sales companies and representatives in more than 80 countries.


 Products

  • maxGUARD
    The Innovative Control Voltage Distribution System. An addition in Weidmuller's Klippon® Connect portfolio of products and services for panel building....

  • With maxGUARD, the electronic load monitoring ELM devices combined with distribution terminal blocks can be customized to provide selective load protection in 24V DC power distributed systems for industrial automation applications. With combining load monitoring and potential distribution into one complete solution, this offers users time-savings during installation, increased safety against failure, and DIN-rail space savings while being highly service friendly.

    The modular maxGUARD system is designed to meet specific requirements for automation control panels. It contains three main cross-connection channels– positive, negative and internal signaling. This design increases the number of possible contacts from the electronic load monitoring device outputs (positive and negative) into the terminal blocks, providing efficient connections for the distribution board loads, as well as reduced wiring. Integrated test points in maxGUARD’s terminals and a disconnect lever for load circuit galvanic isolation helps to simplify testing and troubleshooting.

  • PLC 5 1771 Migration Platform
    Weidmuller’s migration solution for converting legacy Allen-Bradley PLC 5 1771 makes it easy to migrate and test in hours, not weeks....

  • Weidmuller’s new universal conversion/migration platform for updating legacy PLC systems is a uniquely designed solution that permits existing field wiring to remain in place and undisturbed on the front panel adaptor, eliminating the need to wire-trace or ring-out. This reduces the PLC conversion time from weeks to just hours and helps provide a substantial cost savings.

    The Weidmuller platform is a universal solution for all legacy Allen-Bradley PLC 5 1771 systems and uses a minimal number of components. It includes just five versions of a card adaptor, 10-, 12-, 18-, 21- and 40-points, with five connecting cable types to accommodate either flying leads or pre-wired field connectors. All the components are plug-and-play with keyed connectors to eliminate any chance of wiring errors. The card adaptors are cURus approved and the engineered cables are UL and CSA listed. In addition, the cables are RoHS and FT4 rated at 300V.

  • u-remote Distributed I/O Platform
    The Weidmuller u-remote distributed I/O platform meets the requirements for use in the demanding maritime and offshore sectors. An advanced IP20 platform, it’s built to ensure faster installation and setup, and designed to improve automation performance....

  • u-remote has received certification from several classification agencies including DNV GL (formerly Det Norske Veritas and Germanischer Lloyd), BV (Bureau Veritas), LR (Lloyds Register), and RINA (Registro Italiano Navale). This certification applies to most areas on a ship, including the ship’s bridge. Weidmuller’s u-remote offers the ability to improve the reliability and efficiency of ship and offshore automation applications.

    u-remote is a highly integrated, user-friendly I/O platform that combines a high level of performance with optimum system handling. Its robust design is suited to the sensitive and harsh environmental conditions found in maritime and offshore applications. u-remote I/O features a wide operating temperature range of -20°C to 60°C, and can withstand high levels of humidity (up to 100%), intense vibration (up to 4 g) and high-energy electromagnetic fields, without emitting high levels of radiation that could affect other devices.

    An integrated web server helps speed up installation and provides real time network access to the 64 I/O slices/cards connected to a single field bus coupler.


Send Email

Type your information and click "Send Email" to send an email to this exhibitor. To return to the previous screen without saving, click "Reset".


Please contact otc.events@otcnet.org for questions.
For technical assistance please contact: support