BRI Cleanup AS

Bleivassvegen 78
Agotnes
Ågotnes,  Hordaland  5363

Norway
+4756323600
http://www.bricu.no
  • Booth: 4438


Sand and solids control during production and flowback

Dynamic Desander System is a patented and field-proven technology that removes solids (sand, proppants etc.) from the well stream. We can boost your production, allowing higher sand-free rates, and improve the efficiency of post-frac flowbacks, driving down the costs of each frac job. The technology has been used on land and offshore for 13 years.


 Products

  • Dynamic Desander System
    The DDS provides unique solids separation performance is based on combined cyclonic and centrifugal action. This stabilizes the process and provides top separation efficiency for all flow regimes. The unit does not generate any pressure drop....

  • Parameters Dynamic Desander Conventional cyclone

    DDS units are available for lease and for purchase (can be custom-built according to requirements).

    Pressure rating: up to 5,000 PSI (10,000 PSI available upon order)

    Maximum operating temperature: 120 degrees C (250 degrees F)

    Materials: duplex and stainless steel

    Maximum liquid flow: 2,500 l/min (22,500 bbl/day)

    Maximum gas flow: 6,8 mmscf/day @ 150 barg (2100 PSI)

    Weight: 5600 kg (13,000 lbs)

    Size (L*W*H): 2*2*5 m (6,6*6,6*13,1 ft)

    Requires: air, water, electrical power

    Comparison to our comptetitors (conventional hydrocyclones)

    Pressure drop No Yes
    Flow rate dependancy Independant Strongly dependant
    Particle separation Down to 20 micrones Depends on flow and pressure
    Data management Real time solids weight No
    Sand management Automated flushing Manual handling
    Slugging Efficient slug handling High risk of plugging
    Abrasive damange No, full bore unit Yes, need of liners
    Power requirement Electric motor Well pressure

Send Email

Type your information and click "Send Email" to send an email to this exhibitor. To return to the previous screen without saving, click "Reset".


Please contact otc.events@otcnet.org for questions.
For technical assistance please contact: Support@a2zinc.net