We manufacture & exporters of Stainless Steel Annular Corrugated Metallic Flexible Hoses With Stainless Steel Wire Braiding Hose size from 1/4" NB ( DN 06 ) to 12" NB ( DN 300 ) in AISI 304, 316, 316L and 321 grades with any type of mounting fittings as per customer's specification. Our products conform to BS6501 Part I / ISO EN 10380 : 2012 and approved by DET NORSKE VERITAS (DNV)
Stainless Steel Braided Flexible Pump Connectors
Stainless Steel Flexible Pump Connectors are designed for mechanical equipment to isolate vibration, relieve stresses, reduce noise, absorb small movements and to facilitate installation. Flexible pump connectors to use suppress vibration from pump, to absorb intermittent lateral movements in pipelines and to compensate for subsidence when pipelines cross building movement lines.
Stainless Steel Flexible Pump Connectors are manufacturing in austenitic steel ANSI 321 (DIN EN 1.4541) & ANSI 316L (DIN EN 1.4404) grades with over ANSI 304 (DIN EN 1.4301) / ANSI 316L (DIN EN 1.4404) single or double wire braided. Hoses conform to BS 6501, Part-1:2004 / ISO 10380 : 2012.
Stainless Steel Braided Flexible Pump Connectors – MaleThreaded/Hexagonal FixedMaleThreaded
Stainless Steel Braided Flexible Pump Connectors Flange End
Ÿ Flexible pump connector are designed the test pressure is 1.5 times of the
max. Working pressure.
Ÿ The burst pressure is 4 times of the working pressure.
Ÿ They are use for full vacuum and operating temperature of -200° C to +550° C.
Ÿ Flexible Pump Connectors are not suitable for absorbing AXIAL Movement.
Ÿ We are also manufacturing higher pressure Pump Connectors as per
Advantages of Flexible pump connector:
Ÿ Absorbs misalignment, vibration and sound. Ÿ Withstands high pressure. Ÿ Excellent corrosion-resistance. Ÿ Excellent for use with moderate many solvents, chemicals, most oils and grease.