Moxa  

Moxa’s MXstudio industrial network management suite combines all the tools you need throughout the network’s life cycle into one toolbox, including MXview industrial management software, MXconfig industrial network configuration tool, and N-Snap industrial network snapshot tool. Whether it is for configuration, monitoring, maintenance, or troubleshooting, the all-in-one MXstudio software suite has a tool for every task. In addition, MXstudio’s three key benefits, easy configuration, smart visualization, and quick troubleshooting, are designed to meet the demands of industrial automation networks.

The NAT-102 Series is an industrial NAT device that is designed to simplify the IP configuration of machines in existing network infrastructure in factory automation environments. The NAT-102 Series provides complete NAT functionality to adapt your machines to specific network scenarios without complicated, costly, and time-consuming configurations. These devices also protect the internal network from unauthorized access by outside hosts.

The EDR-810 is a highly integrated industrial multiport secure router with firewall/NAT/VPN and managed Layer 2 switch functions. It is designed for Ethernet-based security applications on critical remote control or monitoring networks, and it provides a security perimeter for the protection of critical cyber assets including pump-and-treat systems in water stations, DCS systems in oil and gas applications, and PLC/SCADA systems in factory automation.

• Firewall/NAT: Firewall policies control network traffic between different trust zones, and Network Address Translation (NAT) shields the internal LAN from unauthorized activity by outside hosts.
• VPN: Virtual Private Networking (VPN) is designed to provide users with secure communication tunnels when accessing a private network from the public Internet. VPNs use IPsec (IP Security) server or client mode for encryption and authentication of all IP packets at the network layer to ensure confidentiality and sender authentication.

The EDR-G902 is a high-performance, industrial VPN server with a firewall/NAT all-in-one secure router. It is designed for Ethernet-based security applications on critical remote control or monitoring networks, and it provides an Electronic Security Perimeter for the protection of critical cyber assets including pumping stations, DCS, PLC systems on oil rigs, and water treatment systems. The EDR-G902 Series includes the following cybersecurity features:

• Virtual Private Network (VPN): VPNs are designed to provide users with secure communication links when accessing a private network from the public Internet. They use IPsec (IP Security) server or client mode for encryption and authentication of all IP packets at the network layer to ensure confidentiality and sender authentication.
• Firewall: Controls network traffic between different trust zones. Network Address Translation (NAT), which shields the internal LAN from unauthorized activity from outside hosts.

The EDR-G903 is a high-performance, industrial VPN server with a firewall/NAT all-in-one secure router. It is designed for Ethernet-based security applications on critical remote control or monitoring networks, and it provides an Electronic Security Perimeter for the protection of critical cyber assets such as pumping stations, DCS, PLC systems on oil rigs, and water treatment systems. The EDR-G903 Series includes the following cybersecurity features:

• Virtual Private Network (VPN): VPNs are designed to provide users with secure communication links when accessing a private network from the public Internet. They use IPsec (IP Security) server or client mode for encryption and authentication of all IP packets at the network layer to ensure confidentiality and sender authentication.
• Firewall: Controls network traffic between different trust zones. Network Address Translation (NAT), which shields the internal LAN from unauthorized activity from outside hosts.

The EDR-G9010 Series is a set of highly integrated industrial multi-port secure routers with firewall/NAT/VPN and managed Layer 2 switch functions. These devices are designed for Ethernet-based security applications in critical remote control or monitoring networks.

Defend Against Malicious Threats With Advanced Cybersecurity Features

The EDR-G9010 Series’ embedded firewall uses policy rules to control network traffic between trusted zones while Network Address Translation (NAT) shields the internal network from unauthorized access by outside hosts. The Virtual Private Networking (VPN) functionality further provides users with secure communication tunnels when accessing the private network from the public Internet. To help protect your OT assets from cyberattacks, the EDR-G9010 Series supports Deep Packet Inspection (DPI) to examine the data portion of network packets for various OT-specific protocols.

Moxa Remote Connect (MRC) is an easy-to-use, secure, and versatile networking solution designed to seamlessly bridge field devices, engineers, and application servers together over the Internet for industrial applications. The solution combines MRC Server, MRC Gateway, and MRC Client. The MRC Server is a connection management platform that determines how the MRC Gateways and MRC Clients are related. The MRC Gateway is a secure gateway that connects Ethernet-ready devices at remote sites to the MRC Client. The MRC Client is a software tool that allows engineers to choose which remote device to connect to from a user’s laptop. Another benefit of the MRC Server is that it gives administrators a lot of control over the remote connection including during which periods of time it can be accessed and the kind of features that are available.

The Moxa IEF-G9010 Series industrial IPS firewall can segment and hide your network and protect mission-critical assets with industrial-grade IPS and granular access control. Meanwhile, the Security Dashboard Console (SDC) software, when used together with the IEF-G9010 Series, offers another layer of protection through centralized critical asset visibility, network analysis, and auto pattern updating.

The IEF-G9010 Series is designed to protect mission-critical assets at the OT network edge. It silently analyzes your network traffic in the background and offers granular behavior monitoring and control of cyber activities. These firewall devices provide both “Monitor” and “Protect” modes to facilitate different OT scenarios. Monitoring mode gives administrators full visibility of cyber threat activities. In the case of an emergency, administrators can easily switch to “Protect” mode to block and contain any malicious operations.

The Security Dashboard Console (SDC) software is a centralized security platform that allows you to manage IEC-G102-BP Series industrial next-generation IPS and IEF-G9010 industrial next-generation firewall devices on the network and monitor OT cyberthreats to ensure uninterrupted production line operation. SDC offers an additional layer of network protection by providing centralized critical asset visibility, network analysis, and auto pattern updating.

Security Dashboard Console helps administrators and operators centrally manage and monitor all IEC-G102-BP Series and IEF-G9010 Series devices more effectively from a single platform. This offers administrators a way to easily execute policy, firmware, and pattern updates to groups of devices and ensure the network is always backed by the latest security updates.

The Moxa IEC-G102-BP Series industrial next-generation IPS devices protect mission-critical assets with industrial-grade IPS and whitelisting. Meanwhile, the Security Dashboard Console (SDC) software, when used together with the IEC-G102-BP Series, offers another layer of protection through centralized critical asset visibility, network analysis, and auto pattern updating.

The IEC-G102–BP Series is designed to protect mission-critical assets at the OT network edge. It silently analyzes your network traffic in the background and offers granular behavior monitoring and control of cyber activities. These IPS devices provide both “Monitor” and “Protect” modes to facilitate different OT scenarios. Monitoring mode gives administrators full visibility of cyber threat activities. In the case of an emergency, administrators can easily switch to “Protect” mode to block and contain any malicious operations.

Moxa’s new EDS-4000/G4000 Series is a Slim and Compact designed edge Din-Rail Industrial Managed Switch, it offers 68 models with wide range of 10, or 100, or 1000Tx Ethernet, 1G or 2.5G SFP fiber port uplinks, and IEEE 802.3bt PoE++ connectivity solution; withstand extreme harsh environment with wide operating temperature support up to -40 to 75C. Key Features highlighted as below

• Reliability: Support network redundancy protocols: RSTP/STP and Moxa’s Turbo Ring/Chain with fast network recovery time <20ms @250 switches). 
• Advanced Usability: The Ease-of-Use web GUI provides a more intuitive way for users to perform configurations and network management. The rotatable power module offers flexibility to field engineers for installation & maintenance.
• Simple Network Management Software Tool: Associate with Moxa’s MXstudio network management software suite, to enhancing efficiency on installation; improving visibility for remote network and asset management; as well as network security audit. 
• Industrial Certifications: This series is certified for NEMA TS2, EN 50121-4, IEC 61850-3/IEEE 1613², DNV², ATEX Zone 2³, UL Class I Division 2.

The MDS-G4000 Series modular switches support up to 28 Gigabit ports, including 4 embedded ports, 6 interface module expansion slots, and 2 power module slots to ensure sufficient flexibility for a variety of applications. It’s Ultra-compact design and multiple mounting options provides great flexibility for any critical application requirement. The hot-swappable module design enables users to easily change or add modules without shutting down the switch or interrupting network operations.

Optional Modules (RJ45, SFP, and PoE+) delivering an adaptive full Gigabit platform that provides the versatility and bandwidth necessary to serve as an Ethernet aggregation/edge switch. The dual power units (24/48 VDC, 110/220 VAC/VDC) provides redundancy for high reliability and availability while LV and HV power module options to accommodate the power requirements of different applications.

The EDR-G9010 Series is a set of highly integrated industrial multi-port secure routers with firewall/NAT/VPN and managed Layer 2 and 3 redundancy mechanisms to ensure 24/7 non-stop networking. These secure routers provide an electronic security perimeter to protect critical cyber assets including substations in power applications, water wastewater treatment plant network, DCS in oil and gas applications, and traffic signal system within Cities’ ATMS network.

The embedded firewall function uses policy rules to control network traffic between trusted zones while Network Address Translation (NAT) shields the internal network from unauthorized access by outside hosts. The Virtual Private Networking (VPN) functionality further provides users with secure communication tunnels when accessing the private network from the public Internet. It features Deep Packet Inspection (DPI) to examine the data portion of network packets for various OT-specific protocols.

The UC-3111-T-US-LX is a Class 1 Div 2 certified IIoT gateway designed to transmit data from well heads, pump stations, and other field sites and using MQTT over cellular or Wi-Fi to an on-premise or cloud application.

Since it runs Linux and is powered by a 1 GHz CPU and 1 GB of RAM, the UC-3111-T-US-LX can be used as a smart gateway in the field for data pre-processing and transmission. Featuring low power consumption and an advanced heat dissipation design, it operates in temperatures ranging from -40 to 70°C, even with simultaneous use of the Wi-Fi and LTE connections.

The UC-3111-T-US-LX also features the following:

• High VPN performance; more than 70 Mbps Ethernet throughput with AES-256 encryption
• Robust file system to prevent the system from being bricked due to a firmware upgrade failure

The AIG-301-T-US-AZU-LX is a powerful Class 1 Div 2 certified IIoT gateway designed to transmit data from well heads, pump stations, and other field sites and using MQTT over cellular to an on-premise or cloud application. The built-in Azure IoT Edge integration gives OEMs and end users a flexible and powerful option for device provisioning and management through Azure IoT Hub.

The ioLogik E1242 is a Class 1 Div 2 certified Ethernet I/O module that supports the most common industrial and IT protocols to collect I/O data, making it easy to integrate into any SCADA systems and IIoT architecture. It supports Modbus TCP, EtherNet/IP, and SNMP, and can also be accessed via RESTful API and a built-in Moxa MXIO library. Voltage readings from connected sensors and devices are converted simultaneously to each of these protocols.

The ioThinx 4510 is a Class 1 Div 2 certified modular I/O platform with a highly flexible hardware and software design that supports modern data acquisition applications. The control unit and I/O modules are designed to be easily mounted and connected by hand without the use of any tools.

The MGate MB3170 is a Class 1 Div 2 certified Modbus gateway that makes legacy Modbus RTU and ASCII devices easily accessible using Modbus TCP and vice versa. It supports up to 32 TCP master/clients or 32 TCP slave/servers. Routing through the serial ports can be controlled by IP address, TCP port number, or ID mapping. A featured priority control function allows urgent commands to obtain an immediate response.

The configuration interface is easy to use and supports automatic creation of the slave ID routing table by detecting Modbus requests from the SCADA system, saving significant time for initial configuration and deployment.