For up-to-date information (including order forms for carpet, electric, AV and catering) visit the OTC Exhibitor Resources Page

Glenair, Inc.  

1211 Air Way
Glendale,  CA  91201

United States
  • Booth: 2705

GLENAIR is your complete solutions provider for ruggedized interconnect products.  These include: Underwater dry-mate fiber optic and high-speed connectors, custom high-pressure cable assemblies and terminations. Downhole, high-pressure/ high-temp and above-deck shipboard interconnect solutions. Depth rated to 10,000 psi for Oil and Gas industry, naval and defense, deep-sea and oceanographic applications.  

Underwater / Subsea Connectors and PBOF Assemblies for High-Pressure Mission-Critical Marine Applications


  • SeaKing™ Fiber
    10K PSI open-face pressure rated fiber optic connectors, cables and jumpers, plus
    ruggedized transceivers and media converters....

  • Glenair SeaKing™ Fiber Optic solutions include harsh-environment overmolded cable assemblies, multibranch inside-the-box jumpers, as well as Glenair signature high-temp, high-vibration transceivers and optical-to-electrical media converters. Pressure-balanced oil-filled (PBOF) cable assemblies are also available for deep subsea applications.

    „ Ideal for data-intensive subsea applications:  towed-array sonar, well logging and monitoring, and ILI sensors
    „ Overmolded and PBOF butt-joint assemblies
    „ Full hydrostatic qualification test report available
    „ Wide range of fiber and hybrid fiber/electric layouts
    „ Singlemode and multimode
    „ <1.0db data loss for singlemode

    SeaKing Fiber Data Sheet

  • SeaKing™ PEEK Interconnects
    SeaKing™ 700 PEEK Glass-filled composite subsea connectors...

  • „ Superior corrosion resistance, durability, and immunity from cathodic delamination

    „ Same high-pressure performance as stainless steel

    „ Lighter weight with lower deployment costs

    „ Zero magnetic signature

    „ Galvanically compatible with all metal materials

  • SeaKing™ Junior
    High-reliability, dry-mate, harsh-environment, miniature connectors and cables...

  • „ For intelligent inline inspection (PIG) applications and subsea
    „ 6,500 psi (mated condition) pressure-rated connector for overmolded
    (non-PBOF) applications
    „ High density, small form-factor solution—up to 50% reduction in size and
    weight compared to industry standard solutions
    „ Piston-seal nitrile O-ring equipped, epoxy potted
    „ Ultraminiature high-density pin configurations: #22D, #20, #20HD, #16,
    #12, #8 signal, power, fiber optic and high-speed datalink shielded contacts

    SeaKing Junior Data Sheet

  • SeaKing™700 Series
    10K PSI / 700 Bar / 7000m open-face or mated, dual O-ring equipped, high-density, high-voltage, fiber optic and hybrid electrical/optical subsea connectors...

  • SeaKing is an innovative new connector series that eliminates a broad range of mechanical design weaknesses found in many of today’s high-pressure subsea connector families. From its double O-ring seals and retractable engaging nut, to its multi-keyed mating interface, the SeaKing represents a bold new approach to subsea power and signal connectivity. Ideally suited for offshore oil & gas, military/defense, oceanographic research, and other harsh-environment subsea applications, the dry-mate connector series is built for optimal durability and reliability. Tested to 15,000 PSI (open face and mated), and equipped with integrated dual O-ring seals, marine bronze coupling nuts, corrosion-resistant stainless steel shells and high-pressure contact inserts with gold-plated signal contacts, special RF and fiber optic solutions, the Series 70 SeaKing is today’s most advanced high-density signal and standard-density power subsea connector available.

    SeaKing 700 Series Information

  • SeaKing™ Power
    1–6.6kV connectors for deep sea oil & gas primary power junctions...

  • For primary power junction applications
    „ High-voltage 1 – 6.6 kV, high-amperage up to 350A
    „ API-compliant with test ports
    „ Fully redundant dual O-ring sealing
    „ Indexable flange or threaded bulkhead designs
    „ Solder-cup contacts
    „ O-ring pressure inspection ports available on all BCR and FCR designs
    „ 10K PSI Factory acceptance testing in both mated and open-face conditions
    „ Keyed mating interface for mismate prevention

    SeaKing Power Data Sheet

Send Email

Type your information and click "Send Email" to send an email to this exhibitor. To return to the previous screen without saving, click "Reset".

Please contact for questions.