IMI PBM

1070 Sandy Hill Road
Irwin,  PA  15642

United States
https://www.pbmvalve.com
  • Booth: 461

IMI PBM manufactures up to 12" reduced port, CL150, nickel aluminum bronze for ballast valves. They are utilized for Bilge, Utility Seawater, Sea-Chest, Injection Water, Pump Skids, & Water Flood. IMI PBM instrument, double block and bleed, & transmitter isolation valves feature no gauge ports, CL2500, exotic alloys, & are API 607 Ed. qualified.


 Products

  • DOUBLE BLOCK & BLEED VALVES
    Our DBB valves provide true double positive isolation. This configuration provides the best technology for severe isolation services where DBB is required. Designed to ASME B16.34. Ideal for oil refineries where safety/reliability are critical....

  • FEATURES:

    • End connection design and fabrication flexibility
    • Full and reduced port designs
    • Customizable end connections
    • Quarter turn operation
    • Bleed or gauge ports available
    • Bolted body
    • Tested to API-607 (Fire Rated)
    • Braided graphite packing
    • API-641 Low-E standard
    • Gear operated recommended for 1-1/2" and above

    SPECIFICATIONS: 

    • Sizes: 1/2" - 2" up to CL1500#, 1/2" - 3" up CL600#, 1/2" - 6" up to CL300#
    • Material: 316 Stainless Steel, Hastelloy™, Duplex SS, Carbon Steels, Monel or others
    • Temperatures: Ambient to 800°F depending on material
    • End Connections: Thread Pipe, Buttweld, Socket Weld, Instrument Adapter Flange, Others
    • Seats & Seals: V-TEF™, C-TEF™, S-TEF®, PEEK®, Stellite, Tungsten or Chrome Carbide Coated S/S Balls/Seats
    • Stem Packing Material: Braided Graphite V-TEF™, C-TEF™ or S-TEF®, API-622 Low-E Stem Packing Standard
    • Maximum Working Pressure: Maximum CWP depends on class and valve material of construction per ASME B16.34
  • TRANSMITTER ISOLATION VALVES
    IMI PBM's Transmitter Isolation valves are specifically designed for any industry that must obtain pressure or level transmitter readings on tanks and vessels. Our valves are designed to ASME B16.34....

  • FEATURES:

    • TIV valves feature minimal dead space which prevents build-up
    • Available in CL150#, CL300#, and other sizes and pressure ratings
    • Purge ports and optional milled flats enable CIP and drainage without process interruption
    • Bolt pattern accommodates standard industry ANSI CL150# and CL300# flanged connections and retrofits to knife gate patterns
    • Hardware configuration allows separate bolting of valve to tank and transmitter to valves as an additional safety measure for hazardous media
    • Calibration port, CIP ports and locking handle standard
    • Valves are designed to ASME B16.34

    SPECIFICATIONS: 

    • Sizes: 1" port x 3" flanges, 1" port x 2" flanges, 2-1/2" port x 3" flanges
    • Material: 316/317L Stainless Steel, Hastelloy™, C-276, C22®, Titanium, or others
    • Temperatures: Ambient to 450°F depending on material
    • Purge/Bleed Port Size: (4) 1/4" FNPT plugged purge ports with hex head plugs
    • Seats & Seals: V-TEF™ seats with VTFE o-rings, S-TEF® with teflon encapsulated o-rings
    • Stem Packing Material: V-TEF™, S-TEF®
    • Body Bolts & Nuts: 18-8 Stainless Steel
    • Maximum Working Pressure: Maximum CWP depending on flanged rating and valve material of construction
  • INSTRUMENT ISOLATION VALVES
    IMI PBM’s Instrument Isolation valves are used for process flow or isolation of pressure gauge, orifice plates, flush rings and various measurement instruments. Designed to ASME B16.34. Higher performance solution to needle valves....

  • FEATURES:

    • Used for process isolation of pressure gauges, orfice plates, flush rings and various measurement instruments
    • Designed to ASME B16.34
    • Tested to API-607 (Fire Rated)
    • Higher performance solution to needle valves
    • Can comply with API-6D if specified
    • Testing and Documentation - Material test reports, PMI, LP, radiographic examination, pressure testing per API598, Magnetic particle examination, ultrasonic examination
    • Certified SIL-3 capable per IEC 61503
    • Certified to API-622/API-641

    SPECIFICATIONS: 

    • Sizes: 1/2" and 3/4" up to ANSI CL2500# (CL 1500# standard)
    • Material: 316 Stainless Steel, Hatelloy™, Duplex SS, Carbon Steels, Monel or others
    • Temperatures: From 350°F to 800°F depending on material
    • End Connections: Thread Pipe, Buttweld, Socket Weld, Compression, Instrument Adapter Flange, Others
    • Seats & Seals: C-TEF™, V-TEF™, S-TEF®, PEEK®, Stellite, Tungsten or Chrome Carbide, Coated S/S Ball/Seats
    • Stem Packing Material: Die molded graphite V-TEF™, C-TEF™ or S-TEF®, API-622 Low-E Stem Packing Standard in 1/2" and 3/4" sizes with 0.41 bore. It is optional in larger sizes.
    • Maximum Working Pressure: Maximum CWP depending on seating and valve material of construction
Please contact otc.events@otcnet.org for questions.
For technical assistance please contact: support.