Dixon Valve & Coupling Company

800 High St.
Chestertown,  MD  21620

United States
410-778-2000
410-778-4702
http://www.dixonvalve.com
  • Booth: 5043

Dixon manufactures and supplies hose couplings, dry disconnects, swivels and other fluid transfer products. With facilities in 11 countries we focus on material transfer applications specifically within the oil & gas industry. Our strategic objective is to create solutions that make products safer, leak-free, longer lasting, and always available.


 Press Releases

  • April 20, 2017

    Dixon Introduces New EZLink™ Armless Cam & Groove Products

    A new push-to-connect positive locking system and low-profile design dramatically improves the ability to easily transfer and unload fuels, water and other liquids.

    Dixon, a leading worldwide manufacturer and supplier of hose fittings and accessories, announces the introduction of its new EZLink™ Armless Cam & Groove product line.

    EZLink is an innovative product design that features an armless positive locking system.  Simply push to connect the EZLink coupler to any standard cam & groove adapter to achieve an ultra-reliable connection.  In addition, the product’s low profile allows for easy connection and disconnection in tight applications and operating conditions.

    The EZLink’s innovative engineering is in stark contrast to conventional cam & groove products. EZLink is easier to connect, and the new design also requires less maintenance since there are no cam lever arms that tend to break and need replacing.

    Commenting on the introduction of the new product line, Brian Zottarelli, vice president and general manager of Dixon’s Cam & Groove Division stated, “EZLink represents a major leap forward in cam & groove technology, and it comes as a direct result of Dixon listening to tank truck operators and the challenges they face in the field.  We responded by developing a new design from the ground up.  We’re excited to offer products that will simplify and improve the transfer and unloading of fuels and other liquids.”

    At present, Dixon’s EZLink product line includes 2”, 3” and 4” type B, C, D and dust caps in aluminum. These configurations come standard with a black Buna nitrile rubber seal. In development are a low temperature seal as well as a chemically resistant seal. A stainless steel EZLink offering is also planned.

    Constructed of A356 aluminum bodies, type 316 stainless steel coupler tabs and springs, along with a Buna-N gasket, EZLink dramatically improves the ability to transfer or unload gasoline or diesel fuels from tank trucks to storage facilities. 

    EZLink is also ideal for transferring water as well as any liquids that are compatible with aluminum and Buna-N rubber materials within a gasket temperature range of 5˚F to 180˚F (-15˚C to 82˚C). The EZLink product is not intended for use in compressed gas service such as steam or air.

    Other operational and safety features of the EZLink product line include coupler push tabs that can be locked with safety pins and/or a zip tie.

    For more information about the new EZLink Armless Cam & Groove product line from Dixon, visit dixonvalve.com/ezlink, call 800.355.1991 or e-mail your request to sales@dixonvalve.com

    Visit Booth 5043 for a product demo.


 Products

  • Dixon Bayloc™ Dry Disconnect Fittings
    Bayloc™ dry disconnect fittings from Dixon are used to transfer paints, coatings, adhesives, petrochemicals, food products and numerous applications where the user wants to "connect with confidence"....

  • The transfer of hazardous and non-hazardous fluids requires a safe and user-friendly coupling system. The Bayloc™ series fittings from Dixon are used to transfer paints, coatings, adhesives, petrochemicals, food products and numerous applications where the user wants to “connect with confidence”. This cam & groove dry disconnect coupling system is the most reliable because it’s easy to operate, maintain, and rebuild if necessary!

    Call 877.963.4966, click dixonvalve.com or visit Booth 5043 to learn more.

  • Dixon One-piece Suction Manifolds
    An example of an innovative Dixon product is the one-piece suction manifold that feeds slurry into high pressure pumps....

  • An innovative Dixon product is the one-piece suction manifold that feeds slurry into high pressure pumps. The manifold design was the result of hydraulic fracturing companies experiencing pump cavitation due to proppant dropout, which causes destructive flow restrictions.

    Call 877.963.4966, click to download a brochure or visit Booth 5043 to learn more.

  • Cryogenic Dry Disconnects and Breakaway Couplings
    Cryogenic Couplings that are Proven in LNG Transfer!...

  • Did you know that Dixon offers dry-disconnect and breakaway couplings to handle cryogenic fluids? The couplings are part of a system that meets the USCG requirements for safe and reliable transfer, and are successfully being used in LNG bunkering operations. Connect with confidence, connect with Dixon!

    Visit Booth 5043 for more information.


Send Email

Type your information and click "Send Email" to send an email to this exhibitor. To return to the previous screen without saving, click "Reset".


Please contact otc.events@otcnet.org for questions.
For technical assistance please contact: Support@a2zinc.net